Edit Content

Civil Labs

Water and Waste Water Analysis Laboratory

Planning new wastewater treatment plants or overhauling and optimizing existing systems requires a comprehensive analysis of the current wastewater. Basic data, such as wastewater volume per day, the temperature of the wastewater, and available space, determines the general design of a facility.
  • Refrigerator
  • Conductivity meter
  • Turbidity meter
  • BOD incubator
  • Deluxe PH meter
  • Hot air oven
  • Jar test apparatus
  • Muffle furnace
  • Water bath
  • Dissolved oxygen analyzer
  • Compound microscope
  • Auto clave
  • Sterilization chamber
  • COD digester with 6 mantle
  • Imhorff cone apparatus
  • Bacteriological incubator
  • Spectrophotometer
  • Flame photometer

Strength of Materials Laboratory

Demonstrating the essential principles within the area of strength and mechanics of materials and structural analysis to the undergraduate students through a series of experiments is that the objective of the strength of materials lab.  Measuring the properties of the materials like impact strength, lastingness, compressive strength, hardness, ductility are conducted within the lab.

Equipment Major Equipment’s Strength of Materials Lab
  • Impact testing machine
  • Mortar cube mould
  • Mechanical extensometer
  • Mechanical spring testing machine
  • Metallurgical microscope
  • Brinell hardness testing machine
  • Muffle furnace
  • Beam deflection testing apparatus
  • Vacate needle apparatus
  • Rockwell hardness testing machine
  • Compress meter
  • Le chatelier’s apparatus
  • Universal testing machine
  • Torsion testing machine
  • Plunger dial gauge
  • Rockwell hardness testing machine
  • Deflection Test Apparatus

Construction Materials & Highway Engineering Laboratory

Study of its constituents and their properties is important for preparing desired mix so on develop required strength necessary for various sorts of Structures. The sturdiness of the structures depends upon the care with which ingredients of concrete are selected, mixed, placed, compacted and cured. The information regarding various properties of concrete in its plastic stage also as hardened Stage is important to enable the engineer for internal control during construction work.


Knowledge of the topic is important for the planning of Concrete Structures. Strength, workability, durability are important characteristics of concrete. Compressive strength of concrete describes the load caring capacity, workability is that the indicator of ease with which we work on concrete, whereas durability shows the resistance of concrete to environmental attack. All these properties of concrete are determined by performing the experiments in Construction materials & Highway Engineering Laboratory.


  • Compression testing machine
  • Flexure testing machine
  • Aggregate Crushing Value Apparatus
  • Aggregate Impact Value Apparatus
  • Slump cone apparatus
  • Flexure testing machine
  • Slump cone apparatus
  • Compaction factor apparatus
  • Concrete mixing machine
  • Flow table
  • UTM – 400 kN capacity
  • Vee Bee Consist meter
  • CBR Apparatus
  • Los – Angeles abrasion testing machine
  • Marshall Stability Apparatus

Applied Hydraulic Engineering

To seek out the discharge within the pipe network and open channels using various equipment’s. To work out the suitability of pumping system for the general public water distribution system and study about the various sorts of pumps.


  • Gear oil pump test Rig
  • Reciprocating Pump test
  • Pitot Tube Apparatus
  • Single stage centrifugal Test Rig
  • Rotometer Test Rig
  • Closed circle multi speed centrifugal ( 3 Stage)
  • Bernoulli’s Theorem
  • Notch Tank Apparatus
  • Mouth Piece Tank
  • Orifice Tank Apparatus
  • Venturi meter Test Rig
  • Orifice meter Test Rig
  • Pipe Friction Test Rig
  • Pelton Turbine Test
  • Closed Circuit Pipe Pipe Friction Minor Loss Apparats
  • Kaplan Turbine Test
  • Francis Turbine Test
  • Closed Circuit Submersible Pump
  • Meta Centeric Height
  • Adjustable Open Channel

Surveying Laboratory

To seek out the discharge within the pipe network and open channels using various equipment’s. To work out the suitability of pumping system for the general public water distribution system and study about the various sorts of pumps.


  • Total Station
  • Theodolite
  • Dumpy Level
  • Plane Table
  • Ranging Rod, Aluminium Levelling Staff
  • Square Cross Staff, Surveying Chain
  • Arrows, Steel tape
  • Pocket Stereoscope
  • Compass Prismatic, Tangent Clinometers
  • Subtense Bar

Soil Mechanics Laboratory

Soil Mechanics is an important branch of civil engineering that contributes to the understanding of ground behaviour. Laboratory testing forms an integral part of the studies required to provide engineering parameters in the design of building and bridge foundations, dams, road and airfield pavements, tunnels, embankments and slopes. Our soil mechanics laboratory is well equipped and provides students with all facilities required to deepen their understanding of the principles governing soil engineering properties and behaviour.


  • Plastic limit apparatus
  • Sieve shaker motorized
  • Liquid limit device
  • Unconfined compression apparatus
  • Field density
  • Pycnometer
  • Sand pouring cylinder
  • Hot air oven
  • Triaxial shear test apparatus
  • Three gang consolidation
  • Direct shear test apparatus
  • Thermometer
  • Universal permeameter
  • Shrinkage limit apparatus
  • Hydrometer
  • Proctor compaction

Soil Mechanics Laboratory

Software development has effectively contributed in various Civil Engineering disciplines, as it provides engineers with the ability to perform variety of complex calculations, modelling, drafting, designing practice and several analysis processes for civil engineering infrastructure. The Computer Aided Building Drawing laboratory aims to introducing the students to draft the plan, elevation and sectional views of buildings in accordance with development and control rules satisfying orientation and functional requirements as per National Building Code. The students will be able to draft the plan, elevation and sectional views of the buildings, industrial structures, and framed buildings using computer software’s.


Name of the software’s available

  1. AutoCAD 2017
  2. STAAD Pro V8i


Subscribe & Follow us